To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Get top-notch style and versatility with this all-aluminum tonneau. Tri-fold cover sits inside your vehicle's bed rails and secures upright for unrestricted bed access. Textured, black paint finish provides durability.
Features:
The BAKFlip G2 tonneau proves that a truck bed cover can be both stylish and functional. This all-aluminum, tri-fold cover keeps your truck bed and its contents dry, cuts down on wind drag to improve your fuel mileage, and allows for full truck bed access without having to be removed. And because this tonneau mounts inside of your truck bed side rails, you get a low-profile look and you can still use your stake pockets to mount accessories.
Convenient Folding Design
One of the BAKFlip G2's most attractive features is that it can be folded all the way up and remain securely positioned on your truck while you are driving, even at highway speeds. This means that you can haul large cargo without having to completely remove the tonneau. Simply unlatch each of the panels, fold them one on top of the other, and flip them back so that they sit upright against the cab of your truck.
Then flip up the prop rods that are attached to the tonneau's frame rails, slide the brackets on the cover down over the rods, and tighten the knobs on the brackets to secure the upright cover in place. Rubber bumpers on the cover prevent it from marking your cab or scratching the glass of your rear windshield. When the tonneau is in this position, your vehicle's third brake light will remain visible.
If you want to maintain visibility out of your rear window, you can secure the folded panels of the cover without propping them up against the cab using the tie-down straps and buckles included with the cover. Just fold up the first 2 panels of the cover, leaving the panel closest to the cab latched in place. Make sure both buckle clips are inserted into the buckle ends on the front header panel of the cover and adjust the straps to ensure the cover is secure.
Simple, One-Person Operation
The BAKFlip G2 is easy to operate. To unlatch the rear panel, drop your tailgate and pull either of the 2 release cords located along the bottom corners of the panel's housing. Either cord will release both of the integrated latches so that you can lift up the panel. To unlatch the second and third panels, pull the easy-to-reach release cords built into the corners of those panels.
To close the cover, simply fold the panels back down. Each panel will securely latch back into place under its own weight. When your tailgate is closed and locked, no one will be able to get in to open the cover, thus safeguarding your truck bed and its contents. The sturdy aluminum construction will also prevent anyone from peeling the cover up at the sides or cutting through its center, ensuring additional security.
Heavy-Duty Construction
The BAKFlip G2's rugged construction makes it a great match for your truck, no matter what you do while at work or play. It's strong enough to hold up to 300 lbs of evenly distributed weight when it's folded down, so it can support your weight if you sit or stand on it.
Each 1/2" thick, rustproof aluminum panel has an insulated core that is made with top-quality, closed-cell foam to create a strong, heavy-duty cover. The black paint finish is UV resistant and offers corrosion protection.
The frame rails are constructed of aircraft-grade, rustproof aluminum and have a sleek black, corrosion-resistant powder coat finish. Glass-filled, aluminum-housed nylon latches and round hinges ensure smooth operation for the life of the cover. And matte black rubber seals run all the way around the cover to help to keep water out of your bed. If any water does seep through, it will run along the gutter system that is built into the frame rails and will then exit through drain hoses that install behind your cab.
Easy, No-Drill Installation
Installing the G2 is simple. All you need is a wrench, and you don't have to do any drilling. The tonneau's frame rails clamp to the inside of your truck bed side rails to create a base for the cover. The included bolts secure the front hinge rail to the frame rails at the cab. Slotted brackets on the hinge rail allow the bolts to shift in case you need to adjust the cover to achieve a snug fit.
California residents: click here
Beats what I had on my bed hands down!!
very easy to install
Great cover easy install to.
Love the look and functionality.
Great product, quality construction.
Good quality product. Easy to use. doesn't leak.
1 year after purchase. Solid product. Very happy with my purchase.
Sorry to say no pictures available at present as I don't have vehicle with me as I'm at work. Be assured that the equipment purchased and installed is working fine and has lived up to its advertisement in all respects. Would recommend to anyone in need or desire for this particular model. Appreciate the follow-up as well. Excellent all around for your company. Thank you.
Great Product, easy install.
Excellent cover no complaints at all,I’m thinking about buying another one for my 2018 f250
I just recieved the product on 05/19/2017 ordered 3 days before Very Fast service . When it quits raining I will install the toono cover in a couple of days. It will make the use of my truck more useful. Going on a trip in a few weeks. It will be a great option for storing my luggage. Thanks again for the great service and product.
Installation went easy and cover fit perfectly. Delivery was sooner than expected. Would recommend this product and supplier to everyone looking for a fold-up cover.
Easy to install and stays where you put it. Foam piece that goes on bed lip near the cab is a little narrow but does fit. After about two months a small (2-3 in. square) area lost lots paint. Other than that it is good quality and is very easy to use.
Fedex delivered with the box torn open on the tonneau cover, fortunately the parts were not damaged, bakflip has great product. Fedex not too happy with them.
Strong, tuff, and well made and it fit perfect on my 2001 Dodge Ram 1500!!
Works great. Took some hail damage but didn't crack or break, Just some dents. The four panels give lots of options and much more secure than a canvas topper. One caution: don't leave you're ice scraper in the bed, since it had a habit of freezing shut in real icy weather.
Would buy again
Keeps my valuables safe and locked up, also doesn't leak and does a fairly good job of flipping and locking. All in all, I am satisfied
Was on the pricey side but is made to hold up. You can stand on on it and it doesn’t hurt it. I found its not completely water tight but it’s not much that gets in. Only issue I had was it was missing a screw and 2 plastic rod holders came broke.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.